|
|
 |
|
|
Thermal CTP Plate Positive Thermal CTP Plate for Medium-Long Run.
Peak Sensitivity at 830nm Infrared Diode Laser. No Preheat Needed. |
|
|
|
Plate Gauges
|
|
Standard: 0.15, 0.25, 0.30 (mm) |
|
|
On-Request: 0.20, 0.40 (mm) |
|
 |
|
|
|
Product Characteristic
|
|
Coating Color: Intense Blue |
|
|
Day Light Tolerance: Up to 2 Hours |
|
|
Spectral Sensitivity: 800-850 nm |
|
|
Imaging Energy: 120 mj/cm2 (Varies for different platesetter) |
|
|
Dot Reproduction: 1%-99% at 200 lpi |
|
|
|
|
|
|
Storage condition
|
|
Temperature: 15-27 ℃ |
|
|
Relative Humidity: 40% - 65% |
|
|
Inventory consumption strategy: First in, first out |
|
|
Shelf Life: 12 months |
|
|
|
|
|
|
|
|
Check up before processing
|
|
Wipe and clean the processor rollers |
|
|
Check if the Rollers operate smoothly |
|
|
Check if the developer temperature is optimum by thermometer |
|
|
Check if the processing dwell speed is normal |
|
|
Make sure if the developer is properly replenished as needed |
|
|
Make sure if the circulating pump works normally |
|
|
Make sure if water rinse and Arabic gum apply are normal |
|
|
After processing 2-3 useless plates, normal processing process can be
started. |
|
|
|
|
|
|
|
|
Processor settings (By Thermal CTP Plate Developer)
|
|
Temperature of developer: 24 ± 1℃ |
|
|
Processing dwell time: 30 ± 5 sec |
|
|
Day-time replenishment: 120 ml / 60 min |
|
|
Night-time replenishment: 120 ml / 60 min |
|
|
Dynamic replenishment: 120-150 ml / m2 |
|
|
Processor OFF replenishment: 500 ml / 1 hr OFF |
|
(If a processor is OFF for 8 hrs, 8*500=4000 ml developer requires
replacing before refilled.) |
|
|
|
|
|
|
|
|
|
 |
|
 |
|
Top High Image
Corp. COPYRIGHT 2008 Add:No.20, Jui-Kuan 2nd St., Ta-Fa Ind. Dist.,
Kaohsiung Shien, Taiwan 831
TEL:+886-7-7877690 FAX:+886-7-7870942
E-mail address: top@pstop.com.tw |
|
